Module
Every sheet reviewed. Every standard checked.
Bimiq reviews your drawing set the way a senior reviewer would, and runs the QA/QC checks a set has to pass, in one read. It checks every sheet against your standards, the rest of the set, and your specifications and model, then hands back each issue with the exact sheet and the evidence behind it, before the set goes out.
Two kinds of checking a set needs. Bimiq does both.
One pass over the set, two jobs done: the reviewer's judgment and the QA/QC checklist, on every sheet.
The judgment work
Drawing Review
Reads every sheet against the others and against your spec and model to find where the design contradicts itself, where scope goes missing, and the risks that turn into changes on site. The read a senior reviewer would do if they had time to do all of it.
The compliance work
Drawing QA/QC
Validates the set against your firm's QA/QC process, naming standards, documentation rules and applicable codes: missing tags, broken references, annotation errors, title-block gaps, sheet inconsistencies. The repetitive pass nobody has time to run on every sheet.
Three ways every sheet gets checked.
Against your standards
QA/QC and firm rules: naming, title blocks, tags and references, annotation, sheet setup, your CAD and BIM standards and the codes that apply. Upload your standard once and every set is held to it.
Against the rest of the set
A door on the plan that never makes the schedule. A callout pointing to a sheet that was removed. A level that moved on one sheet and not the others. Bimiq reads the set as one document, not a stack of pages.
A-201 Plan↔A-511 Detail 3
Corridor reads 1500 clear on the plan, 1450 on the detail.
Against the spec and model
Does the drawing match what the specification requires and what the model shows. Connect your Revit model and Bimiq checks each sheet against the elements behind it.
Every finding links to the exact sheet, ranked by what matters.
No finding without a source. Each one points to the sheet and the spot on it, shows both sheets when the issue sits between them, and says why it matters. Nothing is changed for you. Findings are ranked by severity so the set's real problems surface first, and you filter by discipline, sheet, severity or status, or send the ones that need an answer straight to an RFI.
A-201 Plan ↔ A-511 Detail 3
Corridor reads 1500 clear on the plan, 1450 on the detail. One of them breaches the accessible route.
M-401 Schedule
VAV-12 is scheduled but never appears on the mechanical plans.
A-330 Sheet
Detail callout 4/A-330 points to a sheet that was removed in revision C.
Works on the drawings you already have.
Start on the PDF
Upload a PDF set and Bimiq reviews it on day one. No install, no model required, nothing to set up first.
Go deeper with the model
Connect your Revit model through the Bridge and Bimiq checks the sheets against the model too. The model never leaves your machine.
See what it finds in your first set.
Upload a drawing set, specification or submittal and let Bimiq review it. Every finding links back to the exact sheet, clause or model element so you can verify it yourself.
14-day free trial. No card required.